One of the oldest ASTM (American Society for Testing and Materials) committees, Committee C14 on Glass and Glass Products develops test standards for determining the mechanical properties of all types of glasses, including ceramics. ASTM C158 (Standard Test Methods for Strength of Glass by Flexure) provides test methodology for determining the modulus of rupture. The primary challenge using strain gage sensors on glass is surface preparation, which must be done carefully so as not to disturb the glass surface and alter strain readings.
Check here for gages that are available for immediate delivery.
|Linear Pattern: 0.125" active grid, temperature compensated (steel and aluminum), encapsulated, large copper tabs. For automotive, aerospace, medical, and many more.|
|3-Element Rectangular Rosette Pattern: 0.125" active grids, temperature compensated (steel and aluminum), encapsulated, large copper tabs. For automotive, aerospace, medical, and many more.|
|Tee Rosette Pattern: 0.125" active grids, temperature compensated (steel and aluminum), encapsulated, large copper tabs. For automotive, aerospace, medical, and many more.|
|General Purpose Strain Gages - Linear Pattern|
|The Model D4 Data Acquisition Conditioner is a portable, USB-powered precision instrument for use with resistive strain gages and strain gage-based transducers.|
|Most widely used general-purpose adhesive. Easiest to handle. Fast room-temperature curing.|
|The Model P3 Strain Indicator and Recorder is a portable, battery-operated instruments capable of simultaneously accepting four inputs from quarter-, half-, and full-bridge strain-gage circuits, including strain-gage-based transducers.|
|Includes: 361A-20R Solder,361-40R Solder,430-20S Solder,450-20R Solder,450-20S Solder,570-28R Solder,1240 FPA Solder, M-Flux FAR-2 Kit, M Flux AR-2 Bulk, RSK-1 Rosin Solvent Kit,RSK-2 Rosin Solvent Bulk,RSK-4 Rosin Solvent Kit,FSS-1 M-Flux SS Kit,WRS-1 Resistance Soldering Unit (110 Vac),WRS-2 Resistance Soldering Unit (220 Vac),WRS-A Replacement Electrodes|
|Includes: SSH-1 Surgical Shears, STW-1 Tweezers,BTW-1 Tweezer,DPR-1 Dental Probe,SSC-1 Surgical Scalpel and Blade,SSC-2 Replacement Scalpel Blades,SSS-1 Steel Scale,DP-1 4-H Drafting Pencil,DWC-1 Diagonal Cutters,NNP-1 Needle-Nosed Pliers,ATS-2 Gage Application Tool Set,GT-11 Camel's Hair Brush,SPT-1 Stainless Steel Mixing Spatula,SPT-2 Stainless Steel Mixing Spatula,MHG-1 Master Mite Heat Gun,MHG-2 Master Mite Heat Gun,PCT-3M Gage Installation Tape,PCT-3D, PCT-3MD, PDT-3 Paper Drafting Tape PLY-001 Kapton Film,MJG-2 Mylar Tape,TFT-2 Thermosetting Fiberglass Tape,FGC-1 Woven Fiberglass Cloth,TFE-2 High Modulus TFE Teflon with Silicone Mastic,HSC-1 Spring Clamp,HSC-2 Spring Clamp,HSC-3 Spring Clamp,GT-12 Neg'ator Constant Force Extension Spring Clamp,TFE-1 Teflon Film,GT-14 Pressure Pads and Backup Plates,SGP-1 Silicone Rubber,SGP-2 Silicone Rubber PCT-3D PCT-3MD|
|Includes CSM-3 Degreaser, GC-6 Isopropyl Alcohol, Conditioner A, MCA-1, MCA-2, MN5A-1, MN5A-2, SCP-1, SCP-2, SCP-3, GC-5, TEC-1, CSP-1, GSP-1|
|System 7000 hardware is designed to incorporate al the features required for precision strain measurement in a high channel density enclosure.|
|System 8000 from Micro-Measurements is a versatile, precision data acquisition instrument system intended for static and dynamic test and measurement applications.|