brands | investors | corporate
Home - Applications - Strain measurements bundle for PCB

PRINTED CIRCUIT BOARDS — Recommended Components

Consumer products endure much abuse. It is necessary to perform load and thermal testing to ensure printed circuit boards (PCB) survive. Several test standards are available, but those offered by the Joint Electron Device Council (JEDEC) are highly regarded, and frequently used. IPC/JEDEC-9704A (Printed Circuit Assembly Strain Gage Test Guideline) describes reliability testing using strain gage sensors. Micro-Measurements has strain gage sensor patterns specifically designed to meet the standard requirements.

Check here for gages that are available for immediate delivery.

Strain Sensor Reference GuideFeatured Products

Table Search:
Rows Per Page:
Page Controls:
The Model D4 Data Acquisition Conditioner is a portable, USB-powered precision instrument for use with resistive strain gages and strain gage-based transducers.
Stacked, 0-45-90 rosette for use in applications involving limited gaging areas applications involving limited gaging areas or steep strain gradients. The matrix has a circular trim (SP70).
Most widely used general-purpose adhesive. Easiest to handle. Fast room-temperature curing.
General-purpose laboratory coating.
The Model P3 Strain Indicator and Recorder is a portable, battery-operated instruments capable of simultaneously accepting four inputs from quarter-, half-, and full-bridge strain-gage circuits, including strain-gage-based transducers.
Includes: SSH-1 Surgical Shears, STW-1 Tweezers,BTW-1 Tweezer,DPR-1 Dental Probe,SSC-1 Surgical Scalpel and Blade,SSC-2 Replacement Scalpel Blades,SSS-1 Steel Scale,DP-1 4-H Drafting Pencil,DWC-1 Diagonal Cutters,NNP-1 Needle-Nosed Pliers,ATS-2 Gage Application Tool Set,GT-11 Camel's Hair Brush,SPT-1 Stainless Steel Mixing Spatula,SPT-2 Stainless Steel Mixing Spatula,MHG-1 Master Mite Heat Gun,MHG-2 Master Mite Heat Gun,PCT-2M Gage Installation Tape,PDT-3 Paper Drafting Tape PLY-001 Kapton Film,MJG-2 Mylar Tape,TFT-2 Thermosetting Fiberglass Tape,FGC-1 Woven Fiberglass Cloth,TFE-2 High Modulus TFE Teflon with Silicone Mastic,HSC-1 Spring Clamp,HSC-2 Spring Clamp,HSC-3 Spring Clamp,GT-12 Neg'ator Constant Force Extension Spring Clamp,TFE-1 Teflon Film,GT-14 Pressure Pads and Backup Plates,SGP-1 Silicone Rubber,SGP-2 Silicone Rubber
Includes CSM-3 Degreaser, GC-6 Isopropyl Alcohol, Conditional A, MCA-1, MCA-2, MN5A-1,  MN5A-2, SCP-1, SCP-2, SCP-3, GC-5, TEC-1, CSP-1, GSP-1
System 7000 hardware is designed to incorporate al the features required for precision strain measurement in a high channel density enclosure.
System 8000 from Micro-Measurements is a versatile, precision data acquisition instrument system intended for static and dynamic test and measurement applications.
System 9000 from Micro-Measurements is a versatile, precision data acquisition instrument system intended for precision data acquisition instrument system intended for dynamic test and measurement applications.